2021-04-29 10:16:03.349 - warn: host.raspberrypiiobroker instance system.adapter.node-red.0 terminated due to SIGTERM First I had it with my old cc2531 and then decided to buy a conbee II. My workaround: restart the RPI every 2-3 days. Hi @Domi920 , I think that the pure number of devices should not be the reason of this issue. Ich möchte deconz komplett deinstallieren, alles aus dem iobroker raus was damit zu tun hat, alles vom raspi runter (deconz software, REST API?!). With a network of 75 devices, i was done after 20 minutes. Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. for artek, at DeconzAdapter. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/deconz/adapter/deconzAdapter.js:552:23) lrwxrwxrwx 1 root root 13 Oct 4 18:17 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00014EF229-if00 -> ../../ttyACM0 But I think the initial problem lies in the error posted by me and develops to the other errors. 2021-04-29 10:18:52.228 - info: zigbee.0 (956) 0x7cb03eaa0a08dd87 (addr 28120): AB3257001NJ - OSRAM Smart+ plug (Router) 2021-04-29 10:16:00.894 - info: host.raspberrypiiobroker stopInstance system.adapter.hmip.0 killing pid 920 Ok, thank you for the many contributions. I don´t want to say there is a bug in version 1.2.1, i will only say there is no communication between Stick & 1.2.1. But after these 10 seconds the light switches on. Zuerst meldet Ihr Euch via Putty auf Eurem Ein-Platinen-Computer an, auf dem Ihr IObroker installiert habt. Lots of warnings and errors. Is this normal? 2021-04-29 10:15:59.860 - info: host.raspberrypiiobroker stopInstance system.adapter.admin.0 (force=false, process=true) 2021-04-29 10:15:59.888 - info: history.0 (801) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 【NOTES】An Aqara Hub is required and sold separately. With lamps, switches, etc., no transmissions are likely to take place in the idle state. Is heard after 10 seconds Error message in the log: (9742) Error on send command to 0x(device number here). Could you explain what I have to do when I get my new CC2538 in order to get back up and running please? I used a raspberry and this https://notenoughtech.com/home-automation/flashing-cc2531-without-cc-debugger/ solution. It looks like there is a buffer overflow or something like that anywhere in the code. 2021-04-29 10:41:45.534 - warn: zigbee.0 (956) Failed to ping 0x7cb03eaa0a08fb9e Plug 01 lrwxrwxrwx 1 root root 13 Oct 4 18:17 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E1F6FD-if00 -> ../../ttyACM3. zigbee.0 | 2020-11-18 07:39:57.988 | info | (32437) cleaned everything up... zigbee.0 | 2020-11-18 07:39:57.988 | error | at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:24:58) zigbee.0 | 2020-11-18 07:39:57.988 | error | at Generator.next (
) zigbee.0 | 2020-11-18 07:39:57.988 | error | at ZStackAdapter. (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:339:27) zigbee.0 | 2020-11-18 07:39:57.988 | error | (32437) Error: Command 0x00124b002247bd4f/1 ssIasZone.enrollRsp({"enrollrspcode":0,"zoneid":23}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direct zigbee.0 | 2020-11-18 07:39:57.987 | error | (32437) unhandled promise rejection: Command 0x00124b002247bd4f/1 ssIasZone.enrollRsp({"enrollrspcode":0,"zoneid":23}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefault Unhandled | 2020-11-18 07:39:57.987 | error | promise rejection. Hardware Bonjour, après avoir suivi la documentation du plugin Deconz pour et divers discussions sur le forum, je me retrouve toujours avec une clé Conbee II et un capteur Aqara MCCGQ11LM inutilisables. My cold starts include a complete power removal of the pi and therefore the CC2531 for at least 5 minutes. 2021-04-29 10:16:03.349 - warn: host.raspberrypiiobroker instance system.adapter.hmip.0 terminated due to SIGTERM 2021-04-29 11:32:26.803 - warn: jarvis.0 (1062) Wiederverbinden Besides the documentation, you can also get support and ask questions on the Forum and Discord channel. Cc2531 Ikea Tradfri Io Broker No Pairing Erfahrungsbericht Ikea Fyrtur Und Kadrilj Smarte Rollos In Den 2021-04-29 11:17:31.955 - warn: zigbee.0 (956) Stopping to ping 0x7cb03eaa0a0a3f35 Plug 01 after 4 ping attempts replace the cc2531 with something with a bit more power. Do I then have to pair all devices again? We have 10 images about Iobroker Zigbee Adapter including images, pictures, photos, wallpapers, and more. But these new Smart Plugs were the reasons for updating the Adapter. 2021-04-29 10:16:00.893 - info: host.raspberrypiiobroker stopInstance system.adapter.web.0 killing pid 774 I just restartet the zigbee instance today to produce this log: @krumbholz I didn't mean the number of devices, but how much is sent in the background. On Rasp4: As described from First1time the Osram Plugs made the same problems in my environment. 2021-04-29 10:16:03.396 - info: host.raspberrypiiobroker instance system.adapter.javascript.0 terminated with code null () Version 4.2.1 in /opt/iobroker/node_modules/iobroker.admin, node: v10.24.1, js-controller: 3.2.16 Helpful. Version 1.3.8 in /opt/iobroker/node_modules/iobroker.vis, node: v10.24.1, js-controller: 3.2.16 How are your experience now? 2021-04-29 10:16:00.894 - info: host.raspberrypiiobroker stopInstance system.adapter.javascript.0 killing pid 847 Get the best deals on Banggood.com 2021-04-29 11:32:33.216 - info: web.0 (776) ==>Connected system.user.admin from ::ffff:192.168.0.7 You signed in with another tab or window. Cc2531 Ikea Tradfri Io Broker No Pairing Erfahrungsbericht Ikea Fyrtur Und Kadrilj Smarte Rollos In Den I used the Adapter version 1.1.2 before without any craches. The Aqara M2 or M1S Hub can connect up to 128 devices(*use of a repeater such as the Aqara Smart Plug or Aqara Smart Wall Switch(With Neutral) is required). 2021-04-29 10:16:03.100 - info: host.raspberrypiiobroker instance system.adapter.zigbee.0 terminated with code null () After 30 minutes my whole Zigbee environment crashed every time. As requested I removed the info lines and left the warn and error lines and put everything in code brackets (ctrl+e). 2021-04-29 10:16:03.100 - warn: host.raspberrypiiobroker instance system.adapter.zigbee.0 terminated due to SIGTERM ⬇ ⬇ Alle Befehle und weitere Informationen in der Infobox ⬇ ⬇ ioBroker-Master-Kurs: https://haus-automatisierung.com/iobroker-kurs/ Gratis MQTT-Kurs: https. The CC3531 is not on the recommended list of Coordinators anymore for some time now. I also separated the channels of WLAN and ZIGBEE as far as possible. Um Sonoff mit IOBroker zu verbinden, müssen wir zuerst den dazugehörigen Adapter aktivieren (Bild 1) Habt Ihr Euren Sonoff Adapter aktiviert können wir diesen einrichten dazu müssen wir unter Username einen Usernamen festlegen ein Kennwort müssen wir auch festlegen dies ist beides wichtig da wir die Daten . This is reproducable. Restarting the entire ioBroker will not alleviate your problems since they seem to be caused by the communication between the zigbee Coordinator, the Devices and the Zigbee Adapter. After restart (energie off) the the pi4, nothing works anymore. That was the USB Port 1. 2021-04-29 10:41:21.526 - warn: zigbee.0 (956) Failed to ping 0x0017880106ba9230 LTG002 und der Sensor ließ sich mit deCONZ super schnell in meine Homebridge einbinden. 2021-04-29 10:15:59.890 - info: host.raspberrypiiobroker stopInstance system.adapter.discovery.0 send kill signal I updated the adapter manually to Github 1.3.1 because with 1.2.1 in iobroker i cannot add the adapter at all. Make sure this fits by entering your model number. 2021-04-29 00:58:57.347 - warn: zigbee.0 (947) Stopping to ping 0x0017880106ba9230 LTG002 after 4 ping attempts But it is not possible to send this messages to lamps who used only the Zigbeeadapter. Hi, 2021-04-29 01:43:59.431 - warn: zigbee.0 (947) Stopping to ping 0x0017880106ba7c28 LTG002 after 4 ping attempts Version 1.9.0 in /opt/iobroker/node_modules/iobroker.hmip, node: v10.24.1, js-controller: 3.2.16 Everything had worked wonderfully at first, only for a few days there have been problems. 2021-04-29 10:15:59.872 - info: host.raspberrypiiobroker stopInstance system.adapter.openweathermap.0 (force=false, process=false) Successfully merging a pull request may close this issue. I have removed those and everything works fine again. Version 2.2.0 in /opt/iobroker/node_modules/iobroker.node-red, node: v10.24.1, js-controller: 3.2.16 With this number of devices, the CC2531 stick could not cope. I read a lot of stuff in your forum and learn a lot. 2021-04-29 10:18:52.225 - info: zigbee.0 (956) 0x001788010672904b (addr 2442): 324131092621 - Philips Hue dimmer switch (EndDevice) 2021-04-29 11:36:45.551 - warn: zigbee.0 (956) Stopping to ping 0x7cb03eaa0a08fb9e Plug 01 after 4 ping attempts So maybe the update is causing the CC2531 to crash? 500.63. I am more than happy to oblige, hope this helpes more than it confuses or wastes time: 2021-04-29 00:43:33.979 - warn: zigbee.0 (947) Stopping to ping 0x7cb03eaa0a08dd87 Plug 01 after 4 ping attempts 9 ratings. This was all after the update from 1.1.3. 2021-04-29 10:18:52.223 - info: zigbee.0 (956) 0x0017880106ba8f79 (addr 48503): 929001953301 - Philips Hue white ambiance GU10 with Bluetooth (Router) In case you want to donate click the 'Sponsor' button here. (normally it doesen´t works) I think nobody wanted to say that. 2021-04-29 10:41:45.534 - warn: zigbee.0 (956) Failed to ping 0x7cb03eaa0a08fb9e Plug 01 In den Einstellungen wird nun nach dem "COM-Anschlussname" gefragt & genau hier komme ich auch zu meinem Problem. I also think that you are having some kind of wireless interference, which adds to the problems. 2021-04-29 10:16:00.896 - info: host.raspberrypiiobroker stopInstance system.adapter.jarvis.0 killing pid 1053 My z. 2021-04-29 00:52:29.693 - warn: zigbee.0 (947) Stopping to ping 0x7cb03eaa0a0a3f35 Plug 01 after 4 ping attempts 2021-04-29 10:18:16.985 - info: host.raspberrypiiobroker added notifications configuration of host Using CC2531 stick seemed like a better idea since all zigbee devices should work and i have some from different vendors (ikea, lidl, …). 1x motion detector Tradfri (Ikea 704.299.13) Die ioBroker/HomeAssistent/OpenHAB Anbindung funktioniert stets einwandfrei :-) Darüber lässt es sich auch in HomeKit einbinden. Other than that, i would chose one of these (taken from this page), Electrolama zig-a-zig-ah! April 2020 Matthias Korte 49 Kommentare Arduino, Bibliothek, ESP8266, ioBroker, Laufschrift, LED, Matrix-Display. 2021-04-29 02:00:03.794 - warn: zigbee.0 (947) Stopping to ping 0x00124b002114bfc3 GL-C-006 after 4 ping attempts I have the same problem. Zigbee2MQTT . 2021-04-29 10:18:37.475 - info: javascript.0 (861) script.js.Kevin.Licht.Deckenlicht_Schreibtisch: registered 5 subscriptions and 0 schedules I would strongly suggest that you move from the cc2531 to one of the more powerful zigbee coordinator options. However, the entire system crashes completely within a few hours. 2021-04-29 10:18:45.322 - info: hmip.0 (917) hmip adapter connected and ready 2021-04-29 10:26:13.444 - info: web.0 (776) <==Disconnect system.user.admin from ::ffff:192.168.0.7 jarvis Zigbee Osram Motion sensor will controll a Hue lamp and must switch it about the Zigbee adapter. DECT Phones, Microwaves and 2.4 GHz WIFI networks use the same frequency range as the zigbee Network. 2021-04-29 10:31:41.179 - warn: zigbee.0 (956) Failed to ping 0x0017880106ba7b91 LTG002 2021-04-29 10:18:52.221 - info: zigbee.0 (956) 0x90fd9ffffe64e5f4 (addr 51836): 404000/404005/404012 - Müller Licht Tint LED bulb GU10/E14/E27 350/470/806 lumen, dimmable, color, opal white (Router) 2021-04-29 10:18:37.334 - info: javascript.0 (861) received all states Is that also possible with the software, how? I flushed all to coordinator firmeware from ti. Version 2.1.0 in /opt/iobroker/node_modules/iobroker.jarvis, node: v10.24.1, js-controller: 3.2.16 @ once i´m not a pro in Zigbee. 2021-04-29 11:35:57.542 - warn: zigbee.0 (956) Stopping to ping 0x0017880106ba9230 LTG002 after 4 ping attempts 2021-04-29 10:18:52.231 - info: zigbee.0 (956) Zigbee started 2021-04-29 10:15:59.891 - info: host.raspberrypiiobroker stopInstance system.adapter.fullcalendar.0 send kill signal https://notenoughtech.com/home-automation/flashing-cc2531-without-cc-debugger/, https://forum.iobroker.net/topic/39511/verkaufe-neueste-entwicklung-cc2652p-zigbee-stick, https://www.zigbee2mqtt.io/information/supported_adapters.html, at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/utils/waitress.js:46:35). It doesn´t works. Sign up for a free GitHub account to open an issue and contact its maintainers and the community. 2021-04-29 10:15:59.891 - info: host.raspberrypiiobroker stopInstance system.adapter.zigbee.0 send kill signal If a few more devices are added in the near future, the CC2531 stick will no longer do its job reliably. Maybe you can figure out what the problem is. Already on GitHub? Is it possible to download the 1.1.3 on webspace? I don't know. I've downgraded to iobroker.zigbee v1.1.0. 2021-04-29 13:16:55.331 - error: zigbee.0 (956) Send command to 0x7cb03eaa0a08dd87 failed with no error code (SRSP - AF - dataRequest after 6000ms) Danach entfernt Ihr das Stromkabel und steckt . Now my question would be, which stick would be best? If you need any further info, please dont hesitate to ask. 2021-04-29 11:27:33.552 - warn: zigbee.0 (956) Stopping to ping 0xd0cf5efffe427584 ZBT-ExtendedColor after 4 ping attempts See browser console log for more details: ["devices","states","processedDevices","addedDevices","ignoredDevices","discardedDevices"] I2c Display In Iobroker Einbinden Mqtt D1 Mini Raspberry Pi . Iâm now happy to know that Iâm not the only one with this problems. 2021-04-29 10:16:03.349 - info: host.raspberrypiiobroker instance system.adapter.node-red.0 terminated with code null () Vorneweg: ich nutze alle Sensoren über den CC2531 Stick in Kombination von iOBroker. For other items, please see details. Zigbee Geräte mit dem ConBee Stick als Ersatz zu dem CC2531 USB Stick einsetzen? 2021-04-29 10:18:19.883 - info: admin.0 (629) requesting all objects @krumbholz Thank you for your answer! CC2531 ZigBee USB-Sick zigbee2mqtt ioBroker FHEM openHAB SMA Antenne + Firmware. Vorneweg: ich nutze alle Sensoren über den CC2531 Stick in Kombination von iOBroker. That failed with the typical error: When I left the server working, it was successful. 2021-04-29 10:16:03.348 - warn: host.raspberrypiiobroker instance system.adapter.web.0 terminated due to SIGTERM 2021-04-29 10:16:03.394 - warn: host.raspberrypiiobroker instance system.adapter.fullcalendar.0 terminated due to SIGTERM Heard after 10 seconds. 2021-04-29 10:15:59.891 - info: host.raspberrypiiobroker stopInstance system.adapter.javascript.0 send kill signal 2021-04-29 11:32:28.805 - info: web.0 (776) <==Disconnect system.user.admin from ::ffff:192.168.0.7 2021-04-29 10:18:16.946 - info: host.raspberrypiiobroker connected to Objects and States This issue has been automatically marked as stale because it has not had recent activity. Zigbee Adapter . The old version 1.1.3 works fine. It only helps to unplug the stick (CC2531 stick (FW 20190608)), plug it in again and restart the instance. The sensors sometimes adds fine and everything looks good, but the adapter crashes every ~1-2 minutes with the following error: zigbee.0 | 2020-11-18 07:40:41.115 | warn | (32577) DeviceConfigure failed 0x00124b002247bd4f 66666, attempt 1 (Error: Bind 0x00124b002247bd4f/1 msTemperatureMeasurement from '0x00124b001938cbdc/1' failed (AREQ - ZDO - bindRsp after 10000ms) -- | -- | -- | -- zigbee.0 | 2020-11-18 07:40:31.107 | info | (32577) Zigbee started zigbee.0 | 2020-11-18 07:40:31.107 | info | (32577) 0x00124b002247bd4f (addr 4766): SNZB-03 - SONOFF Motion sensor (EndDevice) zigbee.0 | 2020-11-18 07:40:31.106 | info | (32577) 0x001788011049ee47 (addr 58059): 324131092621 - Philips Hue dimmer switch (EndDevice) zigbee.0 | 2020-11-18 07:40:31.104 | info | (32577) Configuring 0x00124b002247bd4f 66666 zigbee.0 | 2020-11-18 07:40:31.103 | info | (32577) Currently 2 devices are joined: zigbee.0 | 2020-11-18 07:40:31.097 | info | (32577) --> transmitPower : normal zigbee.0 | 2020-11-18 07:40:31.088 | info | (32577) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190223}} zigbee.0 | 2020-11-18 07:40:29.234 | info | (32577) Installed Version: https://github.com/ioBroker/ioBroker.zigbee/commit/master zigbee.0 | 2020-11-18 07:40:29.199 | info | (32577) Starting Zigbee npm ... zigbee.0 | 2020-11-18 07:40:29.173 | info | (32577) starting. I don't know if this also solves the issues of the other reporters, but my system is fine now. I never had disconnect problems with the versions before, only after 1.2. undefined When I restart my Raspi 4 everything works like a charm for about an hour, after that I get this or the other error messages posted above. The CC26X2R1 can be obtained for under EUR 50 directly from TI. Ich habe mir hier raus zusammen mit einer günstigen regensensor kontaktfläche einen smarten Regenmelder gebaut, wenn jetzt ein regentropfen auf die kontaktfläche kommt, dann sendet der aqara wassersensor den Status an mein raspberry/iobroker/CC2531, dieser löst dann eine Alexa/Telegram Meldung aus, die mir sagt dass es anfängt zu regnen! Texas Instruments LAUNCHXL-CC1352P-2. 2021-04-29 10:18:27.293 - info: web.0 (776) starting. 2021-04-29 10:15:59.860 - info: host.raspberrypiiobroker stopInstance system.adapter.discovery.0 (force=false, process=true) ESP8266 Max7219 MQTT Matrixdisplay für ioBroker. with absolutly respekt for you and your team on GIT Hub. 2021-04-29 10:15:59.873 - info: host.raspberrypiiobroker stopInstance system.adapter.jarvis.0 (force=false, process=true) . 2021-04-29 01:43:12.843 - warn: zigbee.0 (947) Stopping to ping 0x0017880106ba7b91 LTG002 after 4 ping attempts But since three or four weeks there are disconnections every few days. Note that not all Zigbee devices support Touchlink, but most bulbs of common brands like Philips and IKEA support this. 2021-04-29 10:18:52.200 - info: zigbee.0 (956) 0xccccccfffebb13bd (addr 28355): 44435 - Müller Licht Tint LED Stripe, color, opal white (Router) März 2018 Daniel Anleitungen, Beleuchtung, ioBroker, Smarthome, Tradfri, Wohnung 2018 15. 1x remote control Tradfri dimmer 2-button, square (Ikea 704.085.95) However, @asgothian advised me against. 1x remote control Tradfri dimmer 5-button, round (Ikea 304.431.24) If I was inspecting it - not. 2021-04-29 01:20:38.704 - warn: zigbee.0 (947) Stopping to ping 0xd0cf5efffe427584 ZBT-ExtendedColor after 4 ping attempts Unfortunately I noticed that ordering is not that easy. ⬇ ⬇ Alle Befehle und weitere Informationen im Blog-Beitrag weiter unten in der Infobox ⬇ ⬇➤ Gratis MQTT-Kurs: https://haus-automatisierung.com/mqtt-kurs/➤ Blog-Beitrag: https://haus-automatisierung.com/projekt/2019/01/16/projekt-conbee-stick-zigbee.html• ConBee - https://haus-auto.com/p/amz/ConBee **• RaspBee - https://haus-auto.com/p/amz/RaspBee **• Raspberry Pi 3 - https://haus-auto.com/p/amz/RaspberryPi **• Raspberry Pi Gehäuse - https://haus-auto.com/p/amz/RaspberryCase **• Raspberry Netzteil 3000mA - https://haus-auto.com/p/amz/RaspberryNetzteil **• Micro SD-Karte - https://haus-auto.com/p/amz/MicroSD **Noch mehr Tutorials und Kurse?➤ https://shop.haus-automatisierung.com/▬▬▬▬▬▬▬▬▬Patreon: https://www.patreon.com/haus_automationFacebook: https://www.facebook.com/HausAutomatisierungCom/Instagram: https://www.instagram.com/haus_automation/Twitter: https://twitter.com/haus_automation#smarthome #homeautomation #hausautomatisierung▬▬▬▬▬▬▬▬▬** Link zu einer Produktempfehlung - Natürlich empfehle ich Dir nur Produkte, welche ich selbst gekauft habe und ebenfalls gerne verwende. But on the third day of frustrated ignoring one of my Osram plugs became controllable via script (the script was running all the time and switches the plug on at 9am and off at 9pm). zigbee2mqtt.io. My setup includes 16 devices and is running without any interruption since my (re)flash almost 10 days before. Sample: Möglich. 2021-04-29 11:32:28.817 - info: web.0 (776) <==Disconnect system.user.admin from ::ffff:192.168.0.7 I can confirm that (re)flashing the stick may solve this issue (may be for the moment). My setup: Everything went fine for months. You can hardly get any of the particularly good sticks on Ebay or Amazon.
Almased Erfolge In 2 Wochen,
Kefir Selber Machen Mit Wasser,
Unterschied Zwischen Anleitung Und Beratung In Der Pflege,
Haus Mit Pferdehaltung Kaufen Baden-württemberg,
Agrilution Plantcube Gewächsschrank,
Trixie Transportbox Größen,
Lithium-ionen Akku Aa Test,
5 Säulen Des Islam Arabisch,
Medulläres Schilddrüsenkarzinom Wiki,
Sehenswürdigkeiten Renesse Kinder,
Krankenversicherung Duales Studium Vergleich,
Cortisonsalbe Rossmann,
Prt Kostenübernahme Techniker Krankenkasse Nrw,